Browse By Brand: CC Products

82 items

1. 1
2. 2
3. 3
4. 4
5. 5

• • 

    1000cc 2nd Oversize Piston

    Back by popular demand, these pistons are 94.5mm and allow the re-use of BMW cylinders outside of the range BMW sizes.

    #101900

    Price: $595.95
    On Sale: $495.95
    You Save: 16.8%
  • 

    1050 Cylinder Sleeve

    This sleeve repairs damaged 1050 cylinders or allows sleeving other cylinders for 1050 kit.

    #CC1

    Price: $140.95
  • 

    1050 Piston Kit - Airheads

    1050CC Piston Kit for R80, R90 and R100. Compete with forged pistons incl. rings and wristpins. An outstanding performance boost for the airhead twins. Pistons are 10% lighter than stock to enhance smoothness, revability and power output. Easily adds up to 7 horsepower with a 9:1 compression ratio. Requires cylinder boring, post-1979 models will require cylinder sleeves.

    #101925

    Price: $716.99
  • 

    36mm K Intake Valves

    These oversize intake valves improve airflow and only require regrinding the seats to match. Works great with porting and K&N filter

    #1818

    Price: $24.95
  • 

    38mm exhaust valve

    38mm exhaust valve, good for unleaded fuel

    #90-9036

    Price: $32.95
  • 

    40mm exhaust valve

    40mm exhaust valve, good for unleaded fuel

    #90-9045

    Price: $32.95
  • 

    42mm intake valve

    42mm intake valve, good for unleaded fuel

    #90-9035

    Price: $32.95
  • 

    44mm intake valve

    44mm intake valve, good for unleaded fuel

    #90-9054

    Price: $32.95
  • 

    45mm Inlet Valve

    45mm inlet valve for R90 and R100. Requires larger valve seat. Improves airflow over smaller valves.

    #1801B

    Price: $32.50
  • 

    750cc Racing Pistons

    These 750 racing pistons are the same pistons Eron Flery used in winning the 750 Sportsman Title in AHRMA. With moved wrist pins that allow .75 shorter cylinders.

    #101111

    Price: $275.95
  • 

    Air Filter / Duct Kit GS/R/RT

    This 3 piece kit includes filter, housing and duct. Fits R1100 and R1150GS, R and RT models.

    #0600SKIT

    Price: $349.95
  • 

    ALUMINUM FAIRING BRACKET S1000RR

    ALUMINUM FAIRING BRACKET S1000RR

    #111FB

    Price: $119.95
  • 

    Balance shaft plug

    This plug allows the removal of the balance shaft on R1200 motors. No mods required. We recommend balancing the top end when the balance shaft is removed.

    #Balance shaft plug

    Price: $50.00
  • 

    Bar End Mirror

    Folding bar end mirror. Fits HP2 Sport.

    #150-0144-001

    Price: $135.95
  • 

    Bar End Mirror

    Bar end mirror. Fits: K1200R K1200S R1200R/S F800S

    #150-0005-001

    Price: $135.95
  • 

    Billet Torque Arm

    Machined alloy paralever torque arm for the R1100S adjusts the rear suspension geometry to improve handling. It makes the maximum use of the extra traction offered by the wide wheel and tire combination. It is recommended to replace the bushing, please indicate on your order form if you would like to purchase this as well. R11S BOXER CUP/ SPORT SUSPENSION/ R1150GS

    #330563

    Price: $199.95
  • 

    Billet Torque Arm for Sport Suspension

    Machined Alloy Paralever arm for the R1100S models with sport suspensions. It provides a slightly revised geometry to quicken the steering response and raise the rear ride height .5" for increased cornering clearance and greater front end weight transfer. Adds a high-tech visual accent too. It is recommended to replace the bushing, please indicate on your order form if you would like to purchase this as well. R1100S STANDERD/ R1150RT/ R1150R

    #330564

    Price: $199.95
  • 

    Billet Triple Clamp

    Precision machined billet alloy triple clamp improves steering response and accuracy. Significantly increases rigidity of fork assembly. Fits airhead dual shock bikes built between '70 and '84. *Not for R65.

    #31426

    Price: $119.95
  • 

    Billet Triple Clamp

    Precision machined billet alloy triple clamp improves steering response and accuracy. Significantly increases rigidity of fork assembly. Fits R-series airhead monolever twins (non GS/ST) built between '85 to 95 only.

    #31428

    Price: $119.95
  • 

    Braced Swingarm

    Minimize shaft effect and improve control of your early model twin. We precision-weld a triangulated brace to the underside of your swingarm to provide the added strength. Definitely a must for any sport riding or touring with heavy loads. Send in your stripped swingarm and allow 5 weeks for turnaround. Powder coating is available for additional cost.

    #33-33176

    Price: $179.95