Search By Keyword
Browse By Bike
Browse By Brand
-
-
Adjustable Handlebar Up & Back Kit
With the kit installed and the handlebar set in the lowest position, the handgrips move back 1.7" and up 1.0". The length of the throttle cables limits adjustment to the three lowest positions out of a possible five. The two available additional positions are each 9mm (.375") up and back at a 30 degree angle. Each move is .324" up and .178" back.#BB3
Price: $154.95 -
Driver Footpeg Lowering Kit - R1200R/ST
Replacement footpeg is 1.3" lower. On the left side, a replacement footpeg is 1.3" lower and clears the side stand.#DL7
Price: $199.95 -
Extended Shift Lever - R1100RT
Replacement for factory shifter, tig weld from stainless steel.#S3
Price: $139.95 -
Extended Shift Lever - R1150R/RS
Replacement for factory shifter. The extended shifter is 1.3" longer and 1.0" lower than standard.#S2
Price: $139.95 -
Extended Shift Lever - R850R, R1100R/RS
Replacement for factory shifter. This shifter is specific to R850R, in brushed stainless steel.#S1
Price: $139.95 -
Extended Shifter R1200RT
R1200RT factory shifter modified - 1.0" longer than stock. Shifter to peg, six inches center to center, 3/4" lower than stock.#S6
Price: $219.25 -
Footpeg Lowering Kit
Footpeg Lowering Kit. K1200GT & K1300GT 2006 thru 2009.#DL6
Price: $164.95 -
Footpeg Lowering Kit - R1100S
Pegs move 40mm (1.57") down and back at 15 degrees. This equals the mounting hole spacing and angle of the rear master cylinder. Net down is 1.516", net back .406"#DL4
Price: $199.95 -
Footpeg Lowering Kit R1200RT
Footpegs move diagonally down & forward at 30 degrees a distance of 1.8". This equals 1.47" down and 0.85"forward. To clear the brake pedal and center stand actuating arm the pegs move to the side 1.2".#DL2
Price: $164.95 -
Footpeg Lowering Kit R1200RT
Lower your footpeg 1.45'' and forward.38''.#DL3
Price: $164.95 -
Footpeg Relocation Kit - F800S/ST
Position cahnge, 1.5" down, 0.4" forward.#DL8
Price: $199.95 -
Footpeg Relocation Kit - K1200LT
Footpeg lowering adapters move the drivers pegs down and forward 1.75" for a more relaxed leg position. No changes to the shift lever or brake pedal are required.#DL1
Price: $159.95 -
Handlebar Bar Back Kit - K1200GT
Hand position change: 2.7" back - 1.1" higher - 10 degrees less droop. It is not necessary to change the throttle cables.#BB2
Price: $209.95 -
Handlebar Bar Back Kit - K1200GT
Hand position change: 2.7" back - 1.1" higher - 10 degrees less droop. It is not necessary to change the throttle cables. Includes longer Spiegler brake line.#BB2B
Price: $249.95 -
Handlebar Riser Kit - R1100S
The handgrips move up 2.25" and back 1.0". Telelever front suspension allows the fork sliders to be raised up through the upper triple clamp without affecting the bike's geometry. The handlebar kit only works on bikes that come from the factory with the clip-on handlebars mounted underneath the triple clamp. If your R1100S has its bars mounted above the triple clamp, our kit will not help.#R3
Price: $99.95 -
Handlebar Up Kit
Position change .894" up , 0.447" back#R3
Price: $94.95 -
Handlebar Up Kit - R1200RT
Net change .894'' up , .447'' back. At the MOA Lima, OH rally, numerous R12RT owners sat on our bike with the handlebar risers installed and gave the new hand position high marks. The view through the mirrors is consistently better.#R2
Price: $94.95 -
K1200GT 06-> BAR BACKS
Heli Tour Performance handlebar relocation adapters move the stock bars and controls 1" closer to the rider from the tallest stock position. These bar backs are designed to: improve ergonomics, enhance low speed handling, hand grips and contorls are positioned for supreme rider comfort, 20 minute installation, maintain all stock equipment.#HR9017
Price: $189.00 -
Long Bolt (for BMW GPS) Handlebar Up Kit
Kit contains four 55mm and four 70mm long bolts for use with the BMW factory GPS.#R3GPS
Price: $99.95 -
Long Bolt (for BMW GPS) Handlebar Up Kit
Kit contains four 55mm and four 70mm long bolts for use with the BMW factory GPS, R1200RT#R2GPS
Price: $99.95
-